Skip to content
We clone and repair modules for BMW, MINI, and other manufacturers. Mail your parts, we transfer the critical data, you plug it back in. No coding required.
We clone and repair modules for BMW, MINI, and other manufacturers. Mail your parts, we transfer the critical data, you plug it back in. No coding required.

MINI Cooper EWS Immobilizer Module Cloning & Replacement Service | R50 R52 R53

Original price $255.00 - Original price $255.00
Original price
$255.00
$255.00 - $255.00
Current price $255.00

MINI Cooper EWS Immobilizer Module Cloning & Replacement Service

Restore your MINI Cooper's immobilizer system without replacing your existing keys or engine computer.

If your MINI Cooper's EWS (Electronic Immobilizer) module has failed, replacing it with a used module is not always plug-and-play. The replacement must contain the correct immobilizer information to work with your vehicle's existing keys and engine control module (DME).

At Apex ECU, we specialize in transferring your original EWS immobilizer data to a compatible replacement module, allowing it to work with your vehicle without additional programming in most successful cloning cases.

Service Price: $255.00

Common Reasons for EWS Replacement

  • Vehicle will not crank or start.

  • Failed internal EWS starter relay.

  • Intermittent starting problems.

  • EWS module has electrical or physical damage.

  • Original EWS needs replacement with a used module.

  • Replacement EWS does not recognize the existing vehicle keys.

  • Immobilizer mismatch following an EWS replacement.

Important: These symptoms can also be caused by other vehicle faults. Our cloning service does not include diagnosing the vehicle.

What's Included

  • Evaluation of the original EWS module for data extraction.

  • Transfer of recoverable immobilizer data to a compatible replacement EWS.

  • Preservation of existing key authorization information.

  • Preservation of the original EWS-DME immobilizer matching data.

  • Verification of the transferred data.

  • Preparation of the replacement EWS for installation.

When the original immobilizer data is intact and cloning is successful, your existing keys and DME should continue to work with the replacement module without additional programming.

Compatible MINI Cooper Models

This service is intended for early-generation MINI Cooper models equipped with a supported EWS immobilizer:

  • MINI Cooper R50 (2002–2006)

  • MINI Cooper S R53 (2002–2006)

  • MINI Cooper Convertible R52 (2005–2008 model years, including early-production vehicles)

Compatibility depends on the original EWS version, part number, and replacement module hardware.

Please contact us with photos of both EWS module labels if you are unsure about compatibility.

How Our Mail-In Cloning Service Works

Step 1: Purchase the Service

Place your order through our website.

Step 2: Prepare Your Modules

Clearly label your original EWS and replacement EWS modules.

Step 3: Ship Both Modules plus original key

Send your original EWS, compatible replacement EWS, and original key to Apex ECU. Include your order number and contact information.

Step 4: Data Transfer & Verification

We attempt to extract the original immobilizer data, transfer it to the replacement module, and verify the programming.

Step 5: Reinstall Your Replacement

After successful cloning, reinstall the replacement EWS in your vehicle.

No additional key programming or EWS-DME synchronization is normally required when the original immobilizer information has been successfully transferred.

Important Service Information

  • This is a cloning service only. Replacement EWS modules are not included.

  • Customer must supply both the original and replacement EWS modules.

  • The replacement must be compatible with the original hardware and immobilizer version.

  • The original EWS must contain recoverable immobilizer data.

  • If the original module cannot be read, additional recovery services may be required at an additional cost.

  • If cloning cannot be completed, we will contact you before proceeding with additional work.

  • Shipping costs are calculated separately unless otherwise specified at checkout.

  • Vehicle-level testing and diagnosis are not included.

Frequently Asked Questions

Can I install a used EWS module without programming?

Generally, no. A used EWS contains immobilizer information from another vehicle. It must be properly matched to your existing keys and engine computer.

Will my original MINI Cooper keys still work?

Yes, provided the original immobilizer data is intact, successfully transferred, and the replacement module is compatible.

Do I need to send my keys or DME?

For a standard EWS cloning service, generally not. We typically need only the original and replacement EWS modules. Additional components may be necessary for advanced recovery situations.

What if my original EWS has a failed starter relay?

If the original EWS still contains readable immobilizer data, we can typically transfer that information to a compatible replacement module.

Can you program my replacement EWS remotely?

A standard used EWS replacement generally requires direct access to the module for immobilizer data programming. Our mail-in cloning service is designed for this situation.

What if my original EWS is completely unreadable?

Advanced recovery or replacement programming may still be possible, but it is not included in the standard cloning price. Contact us before ordering if your original EWS has severe damage.

Questions About Compatibility?

Contact Apex ECU before ordering if you are unsure whether your original and replacement EWS modules are compatible.

Please provide your MINI Cooper's year, model, and photos showing the part numbers on both EWS modules.

OEM Part Numbers:

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare